
Short answer: a 40HQ container usually holds about 180 to 400 office chairs, packed one chair per carton. The number depends almost entirely on the carton size. Large executive chairs with aluminium bases are at the low end, and compact visitor chairs are at the high end. Knock-down (KD) packing can raise the figure. The final quantity for an order is set by the loading plan.
40HQ container dimensions
| Inside measurement | |
|---|---|
| Length | approx. 12.03 m |
| Width | approx. 2.35 m |
| Height | approx. 2.69 m |
| Gross volume | approx. 76 m³ |
| Practical loading volume | about 65–68 m³ |
Cartons are rigid boxes, so some space is always lost at the walls, at the door and between stacked layers. Plan around 65–68 m³, not the full 76 m³.
How to estimate the quantity
- Find the carton volume. Multiply length × width × height in metres. For example, 0.94 × 0.47 × 0.73 m = 0.323 m³.
- Divide 68 m³ by that volume. This gives the best-case number.
- Check the stacking. Count how many cartons fit along the length, the width and the height, in the best orientation. Allow for carton orientation, stack limits and door clearance; volume division alone does not establish a feasible loading plan.
Estimated quantities for OAKMERO models
The figures below use the carton sizes published on each product page, one chair per carton, with standard stacking.
| Model | Type | Carton (cm) | Volume per carton | Estimated chairs per 40HQ |
|---|---|---|---|---|
| H05-C | Visitor chair | 70 × 43 × 55 | 0.166 m³ | about 400 |
| H02 | Mesh task chair | 92 × 40 × 63 | 0.232 m³ | about 260 |
| H09-C | Visitor chair | 77 × 70 × 47 | 0.253 m³ | about 250 |
| H09-B | Low-back chair | 81 × 47 × 73 | 0.278 m³ | about 240 |
| H09 | High-back executive chair | 94 × 47 × 73 | 0.323 m³ | about 190 |
| H05-A / H05-B | Executive chair | 96 × 68 × 47 | 0.307 m³ | about 185 |
These are planning estimates, not a quotation. The confirmed quantity for your configuration is given in the packing specification and loading plan.
What changes the number
- KD packing. Shipping the base, gas lift and arms separately makes the carton smaller. The improvement depends on the model and carton design; ask for a comparison using the actual packing dimensions. Your customer then assembles the chairs at the destination.
- Headrests and fixed arms. A fixed headrest or wide fixed arms makes the carton taller or wider.
- Mixed models. Mixing cartons of different sizes in one container is normal. The large cartons go in first and the small ones fill the gaps. Expect a total slightly below the single-model figure.
- Weight. Office chairs rarely reach the container's weight limit. For example, 190 executive chairs at about 19.5 kg gross weight is about 3.7 tonnes, well below the limit.
Not ready for a full container?
You do not need to fill a 40HQ to order. OAKMERO bulk orders start at 30 chairs, and you can mix models and colours. Standard bulk orders are ready in about 20–30 days after a 30% deposit, based on one 40HQ. Lead times for part-container orders are agreed separately. See Trade Terms and the FAQ.
Frequently asked questions
How many office chairs fit in a 40ft high-cube container?
Usually about 180–400 chairs, one per carton. Executive chairs are at the low end, and visitor chairs are at the high end.
How many office chairs fit in a 20ft container?
A 20GP has about 33 m³ of space, so plan for roughly 40–45% of the 40HQ figure.
Can I mix different chair models in one container?
Yes. Mixed loading is common. Your supplier should confirm the combined quantity in a loading plan before production.
Does KD packing damage the chairs?
KD packing ships the main parts separately. Damage prevention depends on protective packaging and handling. Confirm the packing specification and assembly instructions before ordering.
Plan your order with us.
Share the models, quantity and destination for a quotation matched to your project.
Request a Quote →

